Edgebanders

DELMAC Machinery Group, Inc.

About Us | News

Product Type → Edgebanders for Production

Delmac Machinery

Idi 4100

The IDM IDI-4100 is a PLC controlled Single Sided Edgebander with line control. This machine is designed to apply thin PVC, veneer, HPL and solid wood (to ½”), on four sides, or 3mm PVC on ...

Idi 4700

The IDM IDI-4700 is similar to the 4100 but add 3mm corner rounding capability. This machine is equipped to apply thin PVC, veneer, HPL and 3mm PVC on four sides with corner rounding. The workin...

Idi 5300PM

The IDM IDI-5300PM incorporates pre-mill, a must for high quality edgings on doors. This is a multi-purpose machine equipped to apply thin PVC, veneer, HPL and 3mm PVC on four sides with corner ...

Idi 5500 PM NC

The IDM IDI-5500PM NC is a full NC set-up machine. Leave the cabinet doors closed and run thin PVC, veneer, HPL, solid wood (to ½”), and 3mm PVC on 4 sides with corner rounding. Pre-Milling...

KS 4800

The IDM KS-4800 incorporates a PC control for a high production Single Sided Edgebander with line control. This machine is equipped to apply thin PVC, veneer, HPL and solid wood (up to 5/8”), on...

KS 5800 PM NC

The IDM KS-5800PM NC is a PC controlled full NC set-up machine. Leave the cabinet doors closed and run lots of production or single piece flow with confidence. Thin PVC, veneer, HPL, solid wood ...

WS 6300 PM NC

The IDM WS-6300PM NC offers a heavy duty version of the KS 5800 for solid wood up to one inch thick. It is a Single Sided Edgebander with Pre-Mill and full NC setup. This machine is equipped to ...

HD 4300 S-A

The IDM HD-4300 S-A "Tape Rocket" is a PC controlled, High Speed Production Single Sided Edgebander with line control. This machine is designed to apply thin PVC or veneer on four sides. The wor...

HD 4800 Door

The IDM HD-4800 DOOR is a PC controlled Heavy Production Single Sided Edgebander with line control developed for the Door Industry. This machine is designed to apply thin PVC, veneer, HPL or sol...

HD 6800

The IDM HD-6800 NC is a PC controlled Production Single Sided Edgebander with NC setup. It is designed to apply thin PVC, veneer, HPL and solid wood (up to 1”), on four sides with corner roundin...

HD 7300 PM NC

The IDM HD-7300PM NC is a PC controlled Production Single Sided Edgebander with Pre-Mill and NC setup. Equipped to apply thin PVC, veneer, HPL and solid wood (to 1”), on 4 sides with corner roun...

Genesis Double Sided Edgebander

The GENESIS KS Series is a double-sided combination tenoner/edgebander. It is equipped for squaring and/or edging panels with material in coils. The GENESIS KS PC controlled plus the working uni...

Home | About Us | Machinery | Resources | Services | Brands | News | Contact Us | Site Map | Privacy/Legal
© 2010. Delmac Machinery Group, Inc. 4322 Piedmont Parkway Greensboro, NC 27410 ph: 336-854-1211
Site Design by BEM Interactive